Thinking of kitty recently?
Such a sweetie kitty was...
Kitty is ready to watch over you from a heavenly cloud while you work, study and game. Your guardian angel.
The cloud has a flat base and kitty slides perfectly into place without falling over or sliding out.
***Printed on an Elegoo Neptune 3***
Important settings that worked well:
Nozzle Temp: 220°C
Bed Temp: 60°C
Print Speed: 60mm/s
Initial Layer speed: 10 mm/s
Supports: Organic, Tree
Support Overhang Angle: 50°
Layer height: 0.2mm
Line width: 0.4mm
Initial Layer Line Width: 100%
Wall Thickness: 2mm
Top/Bottom Thickness: 2mm
Infill Density: 12%
Infill Line Distance: 3.33mm
Infill Pattern: Gyroid
Draft Shield: Enabled, 10mm distance, 10mm height
Scale to fit any bed size!
Use tree supports for best results and easiest removal!
*Adjust settings as needed and remember to check Z-offset after leveling, happy printing!
For Individual Private Use ONLY, no resale or redistribution allowed!
All Digital sales FINAL, No Returns or Exchanges Accepted.
Copyright © 2023, Printscape LLC, DBA Kimchi Robotics. All Rights Reserved.
By purchasing this .stl file you acknowledge that you are responsible for providing a printer of the quality of your own choosing as well as the printing materials to safely and responsibly print these models for personal use.
These .stl files may be updated at a future date without notification if a need arises
You MAY NOT reproduce these models digitally or physically for resale!
These models MAY NOT be altered in a way that would take credit away from the original creator Kimchi Robotics.
If you have any further questions please contact via the website where the order was placed.
Printscape LLC is not responsible for any damage or injury caused when using these printable .stl files either digitally or the physical prints.
top of page
bottom of page