Enjoy this FREE stl file I made for you of a smiley faced jack-o-lantern.
Put a battery powered LED light in it and decorate your workspace!
Scale to fit any bed size!
Usually prints quickly (~2-3.5 hours)
Use tree/organic supports for best results and easiest removal!
Check out my other designs on https://cults3d.com/en/users/KimchiRobotics/3d-models and on my website https://www.robotics4beginners.com/shop
*Successfully printed on a factory stock Elegoo Neptune 3 with orange PLA under similar settings:
Nozzle temp: 215-220°C
Layer height: 0.2-0.3
Wall thickness: 0.8-1mm
Bottom thickness: 0.85-1mm
Infill density: 12%
Top/Bottom thickness: 2mm
Print speed: 50-70mm/s
Initial layer speed: 10mm/s
Print time: 2.5-3.5hrs
*Adjust settings as needed!
For Individual Private Use ONLY, no resale or redistribution allowed!
Copyright © 2023, Printscape LLC, DBA Kimchi Robotics. All Rights Reserved.
By downloading this .stl file you acknowledge that you are responsible for providing a printer of the quality of your own choosing as well as the printing materials to safely and responsibly print these models for personal use.
These .stl files may be updated at a future date without notification if a need arises
You MAY NOT reproduce these models digitally or physically for resale!
These models MAY NOT be altered in a way that would take credit away from the original creator Kimchi Robotics.
If you have any further questions please contact via the website where downloaded.
Printscape LLC is not responsible for any damage or injury caused when using these printable .stl files either digitally or the physical prints.
top of page
bottom of page